Ghent University
Belgium
Lode Daelemans
Work
Publications
Analysis of fiber-matrix interface debonding under normal loading using in-situ microscopy and cruciform-shaped single glass fiber composite specimens
Composites Science and Technology
journal-article
A method to determine local aerodynamic force coefficients from fiber-resolved 3D flow simulations around a staple fiber yarn
Multibody System Dynamics
journal-article
The effect of hydrothermal ageing on the interfacial bonding of E-glass fibre/epoxy in quasi-static and fatigue loading
Composites Part B: Engineering
journal-article
Development and Validation of an Actuator Line Method for Fuzzy Yarns in High‐Speed Air Flow
International Journal for Numerical Methods in Engineering
journal-article
Modeling the Fluid‐Structure Interactions of a Hairy Yarn in Air‐Jet Weaving: A Multiscale Approach
International Journal for Numerical Methods in Engineering
journal-article
Experimental method for in-situ real-time measurement of mixed mode fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites
Composites Science and Technology
journal-article
Thermomechanical characterisation of reprocessable, siloxane-based, glass-fibre-reinforced vitrimers
Composites Part B: Engineering
journal-article
Study of the temperature-humidity equivalence and the time-temperature superposition principle in the finite-strain response of polyamide-6 and short glass fibre-reinforced polyamide-6
Polymer Testing
journal-article
Low-Velocity Impact Resistance and Compression After Impact Strength of Thermoplastic Nanofiber Toughened Carbon/Epoxy Composites with Different Layups
Polymers
journal-article
Low-Velocity Impact Resistance and Compression After Impact Strength of Thermoplastic Nanofiber Toughened Carbon/Epoxy Composites with Different Layups
Polymers
journal-article
Mixed experimental-numerical method for quantitative measurement of mode II fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites
Polymer Testing
journal-article
Chemical and structural induced ductile-to-brittle transition in electrospun silica nanofiber membranes
Ceramics International
journal-article
Development of a versatile speckle pattern of nano-sized polymer particles for high-resolution SEM-DIC
Polymer Testing
journal-article
A novel technique to simulate and characterize yarn mechanical behavior based on a geometrical fiber model extracted from microcomputed tomography imaging
Textile Research Journal
journal-article
Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing
Polymers
journal-article
Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing
Polymers
journal-article
Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication
Polymers
journal-article
Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication
Polymers
journal-article
Toughening mechanisms responsible for excellent crack resistance in thermoplastic nanofiber reinforced epoxies through in-situ optical and scanning electron microscopy
Composites Science and Technology
journal-article
Long-term stiffness prediction of particle filled polymers by dynamic mechanical analysis: Frequency sweep versus creep method
Polymer Testing
journal-article
Computational prediction of the molecular configuration of three-dimensional network polymers
Nature Materials
journal-article
Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation
Composites Science and Technology
journal-article
Lifting the quality of fused filament fabrication of polylactic acid based composites
Composites Part B: Engineering
journal-article
Fully Integrated Flexible Dielectric Monitoring Sensor System for Real-Time In Situ Prediction of the Degree of Cure and Glass Transition Temperature of an Epoxy Resin
IEEE Transactions on Instrumentation and Measurement
journal-article
The Transferability and Design of Commercial Printer Settings in PLA/PBAT Fused Filament Fabrication
Polymers
journal-article
From time dependent incorporation of molecular building blocks to application properties for inorganic and organic three-dimensional network polymers
other
In-Situ Observations of Microscale Ductility in a Quasi-Brittle Bulk Scale Epoxy
Polymers
journal-article
In-Situ Observations of Microscale Ductility in a Quasi-Brittle Bulk Scale Epoxy
Polymers
journal-article
The Transferability and Design of Commercial Printer Settings in PLA/PBAT Fused Filament Fabrication
Polymers
journal-article
Interdiffusing core-shell nanofiber interleaved composites for excellent Mode I and Mode II delamination resistance
Composites Science and Technology
journal-article
One-shot production of large-scale 3D woven fabrics with integrated prismatic shaped cavities and their applications
Materials & Design
journal-article
Improving Mechanical Properties for Extrusion-Based Additive Manufacturing of Poly(Lactic Acid) by Annealing and Blending with Poly(3-Hydroxybutyrate)
Polymers
journal-article
Improving Mechanical Properties for Extrusion-Based Additive Manufacturing of Poly(Lactic Acid) by Annealing and Blending with Poly(3-Hydroxybutyrate)
Polymers
journal-article
One-shot production of large-scale 3D woven fabrics with integrated prismatic shaped cavities and their applications
Materials and Design
journal-article
Excellent Nanofiber Adhesion for Hybrid Polymer Materials with High Toughness Based on Matrix Interdiffusion During Chemical Conversion
Advanced Functional Materials
journal-article
Nanostructured Hydrogels by Blend Electrospinning of Polycaprolactone/Gelatin Nanofibers
Nanomaterials
journal-article
Experimental and Numerical Analysis of the Tendon Repair Process Using Tubular Braided Fabrics
Autex Research Journal
journal-article
Silica Nanofibrous Membranes for the Separation of Heterogeneous Azeotropes
Advanced Functional Materials
journal-article
Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres
Composites Part A: Applied Science and Manufacturing
journal-article
Nanostructured hydrogels by blend electrospinning of polycaprolactone/gelatin nanofibers
Nanomaterials
journal-article
Size limitations on achieving tough and healable fibre reinforced composites through the use of thermoplastic nanofibres
Composites Part A: Applied Science and Manufacturing
journal-article
Nanostructured Hydrogels by Blend Electrospinning of Polycaprolactone/Gelatin Nanofibers
Nanomaterials
journal-article
Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates
Materials & Design
journal-article
Electrospun nanofibrous interleaves for improved low velocity impact resistance of glass fibre reinforced composite laminates
Materials and Design
journal-article
Coaxial electrospinning of epoxy and amine monomers in a pullulan shell for self-healing nanovascular systems
Polymer Testing
journal-article
Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method
Composites Part A: Applied Science and Manufacturing
journal-article
Finite element simulations to evaluate deformation of polyester tubular braided structures
Textile Research Journal
journal-article
Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers
Composite Structures
journal-article
A hybrid micro-meso-scale unit cell model for homogenization of the nonlinear orthotropic material behavior of coated fabrics used in tensioned membrane structures
Composite Structures
journal-article
Novel composite materials with tunable delamination resistance using functionalizable electrospun SBS fibers
Composite Structures
journal-article
Finite element simulation of the woven geometry and mechanical behaviour of a 3D woven dry fabric under tensile and shear loading using the digital element method
Composites Science and Technology
journal-article
Finite element simulation of the woven geometry and mechanical behaviour of a 3D woven dry fabric under tensile and shear loading using the digital element method
Composites Science and Technology
journal-article
Improved fatigue delamination behaviour of composite laminates with electrospun thermoplastic nanofibrous interleaves using the Central Cut-Ply method
Composites Part A: Applied Science and Manufacturing
journal-article
Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms
ACS Appl. Mater. Interfaces
journal-article
Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms
ACS Applied Materials and Interfaces
journal-article
Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates
Composites Science and Technology
journal-article
Using aligned nanofibres for identifying the toughening micromechanisms in nanofibre interleaved laminates
Composites Science and Technology
journal-article
Creation of a nanovascular network by electrospun sacrificial nanofibers for self-healing applications and its effect on the flexural properties of the bulk material
Polymer Testing
journal-article
Increasing the damage resistance of composites by interleaving them with electrospun nanofibrous veils
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
conference-paper
Interlaminar toughening of resin transfer molded laminates by electrospun polycaprolactone structures: Effect of the interleave morphology
Composites Science and Technology
journal-article
Virtual mechanical testing of a complex 3D woven fabric: A unified simulation methodology for deformation mechanics of textile structures during tension, shear and draping
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
conference-paper
Bisphenol A based polyester binder as an effective interlaminar toughener
Composites Part B: Engineering
journal-article
Bisphenol A based polyester binder as an effective interlaminar toughener
Composites Part B: Engineering
journal-article
Nanofibre bridging as a toughening mechanism in carbon/epoxy composite laminates interleaved with electrospun polyamide nanofibrous veils
Composites Science and Technology
journal-article
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres
ICCM International Conferences on Composite Materials
conference-paper
Using a polyester binder for the interlaminar toughening of glass/epoxy composite laminates
ICCM International Conferences on Composite Materials
conference-paper
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres
Composites Science and Technology
journal-article
Interlaminar toughening of resin transfer moulded glass fibre epoxy laminates by polycaprolactone electrospun nanofibres
Composites Science and Technology
journal-article